ForumAntibiotic resistance—the interplay between antibiotic use in animals and human beings
Summary
Antibiotic-resistant bacteria were first identified in the 1940s, but while new antibiotics were being discovered at a steady rate, the consequences of this phenomenon were slow to be appreciated. Today, the excessive use of antibiotics compounded by the paucity of new agents on the market has meant the problem of antibiotic resistance is fast escalating into a global health crisis.
There is no doubt that misuse of these drugs in human beings has contributed to the increasing rates of resistance, but recently the use of antibiotics in food animals and its consequent effect on resistance levels in people has also come under scrutiny. Antimicrobials are used therapeutically and prophylactically in animals. More controversially, antimicrobials are also used as growth promoters to improve the ability of the animal to convert feed into body mass.
Some argue that the impact of use of antibiotics in animals—whether therapeutic or as growth promoters—pales by comparison with human use, and that efforts should be concentrated on the misuse of antibiotics in people. Others warn of the dangers of unregulated and unnecessary use of antibiotics, especially growth promoters in animal husbandry. There is a growing concern over the transmission of resistant bacteria via the food chain. Many questions will be difficult to resolve, such as how do you distinguish the fraction of resistance in human beings that originated from animals? If we wait to see evidence that a significant amount of antibiotic resistance really does come through the food chain, will it be too late for action?
In this forum, we present different perspectives from both human and animal medicine, to better understand the complexity of the problem of antibiotic resistance and examine the challenges that lie ahead.
References (6)
- SwannMM
Report of the Joint Committee on the use of antibiotics in animal husbandry and veterinary medicine
(1969) - WHO
WHO global strategy for containment of antimicrobial resistance
(2001) - WHO
WHO global principles for containment of antimicrobial resistance in animals intended for food
(2000)
Cited by (217)
Fungi-derived chitosan as an emulsion stabilizer for the encapsulation of bioactives
2024, Colloids and Surfaces A: Physicochemical and Engineering AspectsIn recent years, an increasing number of industries have been embracing a more sustainable and environmentally friendly approach by adopting materials that are more eco-conscious compared to their previous choices. The food industry is at the forefront of this movement, striving to introduce novel biocompatible and biodegradable materials that can serve various purposes, such as protection agents, supplements, and carriers. Fungal chitosan (FC), has numerous characteristics, such as the lack of allergen animal proteins, consistency in physicochemical characteristics and easy production, while at the same time being an excellent emulsifier. This is why it has gained significant attention from scientists for various applications. In this study, FC particles were formulated using the pH-shifting method, while emulsions were prepared through high-shear homogenization. The emulsions were examined both macroscopically and microscopically. Their droplet size was determined using Static Light Scattering, revealing an average size of approximately 75 µm. Furthermore, α-tocopherol or squalene was successfully encapsulated in these emulsions. Cryogenic Scanning Electron Microscopy (Cryo-SEM) was utilized to visualize the surface of the droplets, and Confocal Laser Scanning Microscopy allowed for the observation of the droplet core. To assess their antioxidant properties, the 2,2-diphenyl-1-picrylhydrazyl (DPPH) colorimetric assay was employed. Additionally, their antimicrobial potency was evaluated. In the presence of the bioactive compounds, both emulsions exhibited scavenging activity against the DPPH radical, with emulsions loaded with α-tocopherol demonstrating the highest antioxidant capacity. Most importantly, all tested samples led to a reduction in the bacterial population of pathogen target bacteria Escherichia coli C1845 (E. coli) and Staphylococcus aureus DSM 21705 (S. aureus) proving they possess antimicrobial properties.
Environmental pitfalls and associated human health risks and ecological impacts from landfill leachate contaminants: Current evidence, recommended interventions and future directions
2024, Science of the Total EnvironmentThe improper management of solid waste, particularly the dumping of untreated municipal solid waste, poses a growing global challenge in both developed and developing nations. The generation of leachate is one of the significant issues that arise from this practice, and it can have harmful impacts on both the environment and public health. This paper presents an overview of the primary waste types that generate landfill leachate and their characteristics. This includes examining the distribution of waste types in landfills globally and how they have changed over time, which can provide valuable insights into potential pollutants in a given area and their trends. With a lack of specific regulations and growing concerns regarding environmental and health impacts, the paper also focuses on emerging contaminants. Furthermore, the environmental and ecological impacts of leachate, along with associated health risks, are analyzed. The potential applications of landfill leachate, suggested interventions and future directions are also discussed in the manuscript. Finally, this work addresses future research directions in landfill leachate studies, with attention, for the first time to the potentialities that artificial intelligence can offer for landfill leachate management, studies, and applications.
Porphyrin and molecularly imprinted polymer double sensitized cathode photoelectrochemical sensor for chlortetracycline
2023, Microchemical JournalA molecularly imprinted photoelectrochemical (PEC) sensor was fabricated for the detection of chlortetracycline (CTC) based on 5,10,15,20-tetrakis(4-carboxylphenyl) porphyrin (TCPP) and poly(o-phenylenediamine) (PoPD) sensitized ZnO-MWCNTs-NH2, which was prepared by a three-steps synthetic route: a simple one-step hydrothermal method for ZnO-MWCNTs-NH2, a successive self-assembly for TCPP loading and in situ electro-polymerization for multifunctional PoPD. Here MWCNTs-NH2 was introduced not only to narrow the band gap of ZnO for enhance visible light absorption, but also to upgrade the surface property for TCPP and PoPD loading, which improved the photocurrent of the photoactive electrode greatly. Besides good selectivity, PoPD film exhibited well energy level matching with ZnO-MWCNTs-NH2/TCPP, thus benefiting for the formation of heterojunction and the separation and transmission of photogenerated carriers. Based on the good matching of organic and inorganic components, a novel cathode MIP-PEC sensor for CTC with good sensitivity and selectivity was constructed. Under the optimized conditions, the MIP-PEC sensor possessed a good linear relationship between the photocurrent intensity and concentration of CTC from 0.5 nmol/L to 10 μmol/L with a detection limit of 0.17 nmol/L (S/N = 3). And it could be used for the detection of CTC in actual samples (e.g. lake water, milk and pork) with recoveries among 86.4%–112.0%, indicating its good practicality.
A novel fluorescent biomimetic sensor based on cerium, nitrogen co-doped carbon quantum dots embedded in cobalt-based metal organic framework@molecularly imprinted polymer for selective and sensitive detection of oxytetracycline
2023, Microchemical JournalSince oxytetracycline (OTC) residues in foodstuff are very harmful to human health, it is urgent to develop an effective assay to monitor OTC. Herein, an innovative fluorescent biomimetic sensor (Ce, N-CDs@ZIF-67@MIP) based on cerium, nitrogen co-doped carbon quantum dots (Ce, N-CDs) embedded in cobalt-based metal organic framework (ZIF-67) combining with molecularly imprinted polymer (MIP) was triumphantly fabricated by a simple one-pot strategy and subsequently applied for the selective and sensitive detection of OTC. In this strategy, the modification of the surface imprint layer enabled the sensor to possess favorable anti-interference ability and specific recognition performance for OTC. The introduction of ZIF-67 with large specific surface area functioning as supporter significantly increased the mass transfer rate and shortened the response time, which improved the adsorption performance and detection sensitivity of Ce, N-CDs@ZIF-67@MIP. Meanwhile, the Ce, N-CDs featured with bright blue fluorescence (FL) and high fluorescence quantum yield (FLQY, 33.69%) were incorporated as a signal label to make the sensor generate measurable FL response signal according to the inner filter effect (IFE), achieving signal amplification. Thanks to the integrated merits of MIP, ZIF-67 and Ce, N-CDs, the constructed Ce, N-CDs@ZIF-67@MIP sensor not only displayed a favorable linear range (0.05–20 μg mL−1) with a low detection limit (0.015 μg mL−1), but also showed good precision and reproducibility (RSD). More importantly, the designed sensor was successfully used to quantitatively analyze OTC in milk samples, and the corresponding results were in accordance with those obtained by HPLC method. Therefore, the proposed Ce, N-CDs@ZIF-67@MIP sensor is expected to provide an efficient and sensitive FL detection platform for OTC evaluation in dairy products.
A novel cellulose/lignin/montmorillonite ternary hybrid aerogel for efficiently adsorptive removal of antibiotics from water
2023, Chemical Engineering JournalA novel fully environmental-friendly organic–inorganic ternary hybrid aerogel (LN/MMT@cellulose), composed of lignin (LN), montmorillonite (MMT), and cellulose, was designed and simply fabricated. LN/MMT@cellulose was employed for the adsorptive removal of typical antibiotic ciprofloxacin (CIP) in water. The combined MMT and LN reinforce the mechanical properties of the cellulose aerogel and notably enhance the selective adsorption capacity toward CIP in the presence of various inorganic and organic matters. LN/MMT@cellulose still presents good adsorption ability toward CIP even at the CIP concentration as low as 0.002 mmol/L in various actual water sources. With the combination of the adsorption kinetics, isotherms, and thermodynamic study as well as the various spectroscopic characterizations before and after adsorption, the mechanisms of LN/MMT@cellulose in CIP adsorption were investigated in detail. Various interactions were involved in CIP adsorption by this composite aerogel under different pH levels, causing the evident pH dependence of its adsorption capacity, specifically, the cation exchange and electrostatic attractions associated with the chelation, π-π electron donor–acceptor interaction, and the ordinary hydrogen bondings were dominant at pH < 6.0, but the complexation and negatively charged assisted hydrogen bondings played the key roles under neutral and alkaline conditions. LN/MMT@cellulose had a slight loss in adsorption ability toward CIP and sustained physicochemical structural stabilities, even after seven adsorption–deadsorption cycles. In addition to CIP, LN/MMT@cellulose could be efficiently used for the adsorptive removal of two other popular antibiotics, namely, tetracycline, and trimethoprim. The said vital characteristics of LN/MMT@cellulose confirmed it is a promising material for the adsorptive removal of antibiotics in practical water treatment.
Z-scheme Bi<inf>2</inf>S<inf>3</inf>-carbon nitride heterojunction photoanode activated efficient photoelectrochemical aptasensing of oxytetracycline and insights into the mechanism
2023, Sensors and Actuators B: ChemicalA photoelectrochemical (PEC) aptasensor for sensitive and selective detection of oxytetracycline (OTC) was designed and constructed based on a novel Z-scheme heterojunction of bismuth sulfide-carbon nitride (Bi2S3-C3N4) as photoactive material. Since the photogenerated electron-hole pairs can be effectively separated by the Z-scheme route, the photocurrent intensity of the constructed Bi2S3-C3N4 heterojunction was about 2.0 times higher than that of pure Bi2S3. Specifically, we disclosed that the increased photocurrent of the aptasensor with the target OTC was ascribed to the oxidation by the generated holes in the Bi2S3-C3N4 based PEC system, which was further validated by electron spin resonance technique. Under the optimized experimental conditions, the photocurrent gradually increased with the increasing of OTC concentration, the proposed PEC aptasensor has the advantages of satisfying linear range (from 1 ×10−12 to 1 ×10−6 M), low detection limit (6 ×10−13 M), excellent selectivity, reproducibility, and stability for OTC detection. In addition, the designed PEC aptasensor has been successfully used for the detection of OTC in soil samples.