An experimental study of a confined and submerged impinging jet heat transfer using Al2O3-water nanofluid
References (31)
- et al.
Heat transfer enhancement by using nanofluids in forced convection flows
Int. J. Heat Fluid Flow
(2005) - et al.
Numerical investigation of laminar flow and heat transfer in a radial flow cooling system with the use of nanofluids
Superlattices and Microstructures
(2004) - et al.
Heat transfer enhancement using Al2O3 water nanofluid for an electronic liquid cooling system
Applied Thermal Engineering
(2007) - et al.
Temperature and particle-size dependent viscosity data for water-based nanofluids—hysteresis phenomenon
Int. J. Heat Fluid Flow
(2007) - et al.
Nanofluids for thermal transport
Materialstoday
(June 2005) - et al.
Experimental study of the hydrodynamic and heat transfer of free liquid jet impinging a flat circular heated disk
Applied Thermal Engineering
(2006) - et al.
Heat transfer behavior in the impingement zone under circular water jet
Int. J. Heat Mass Transfer
(2006) - et al.
Multiple flow patterns and heat transfer in confined jet impingement
Int. J. Heat Mass Transfer
(2005) - et al.
Simulation and measurement of flow and heat transfer in a two planar impinging jets
Int. J. Heat Fluid Flow
(2005) - et al.
A numerical investigation on the fluid flow and heat transfer in the confined impinging slot jet in the low Reynolds number region for different channel heights
Int. J. Heat Mass Transfer
(2008)
Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle
Int. J. Heat Mass Transfer
(2008)
Conceptions for heat transfer correlation of nanofluids
Int. J. Heat Mass Transfer
(2000)
Prediction of turbulent forced convection of a nanofluid in a tube with uniform heat flux using a two-phase approach
Int. J. Heat Fluid Flow
(2007)
Cooling options and challenges of high power semiconductors modules
Electronics Cooling
(2006)
Exploring the limits of air cooling
Electronics Cooling
(2006)
Cited by (142)
Multi-objective optimization of a combined heat sink with triangular protrusion and corrugated surface impinged by a nanofluid slit-confined jet
2024, International Journal of Heat and Mass TransferA review on liquid jet impingement for industrial cooling applications
2023, Progress in Sustainable Development: Sustainable Engineering PracticesImpingement cooling of hot metallic surface by change of fluids: An experimental investigation
2023, Materials Today: ProceedingsStudy on flow and heat transfer of liquid metal in the microchannel heat sink
2023, International Journal of Thermal SciencesHybrid nano-jet impingement cooling of a curved elastic hot surface under the combined effects of non-uniform magnetic field and upper plate inclination
2022, Journal of Magnetism and Magnetic MaterialsNumerical investigation of jet impingement cooling an isothermal surface using extended jet holes with various binary hybrid nanofluids
2021, International Communications in Heat and Mass Transfer
Copyright © 2008 Elsevier Masson SAS. All rights reserved.